Detalhes dos produtos

Para casa > produtos >

Compressor de ar de parafuso de pressão média

Jufeng Two-stage Medium-pressure Screw Air Compressor

Todas as categorias

compressor de ar de parafuso de acionamento direto

Compressor de ar VSD magnético permanente

Compressor de ar integrado do parafuso

Compressor de ar de parafuso a correia

Compressor de ar do parafuso de duas fases

Compressor de ar de parafuso de pressão média

compressor de ar livre do óleo

Equipamento de tratamento de ar do compressor

compressor de ar diesel

Compressor de ar de reforço

Compressor de Ar Centrífugo de Levitação Magnética

Jufeng Two-stage Medium-pressure Screw Air Compressor

Nome da marca:	Jufeng
Número do modelo:	JH-100ADV
MOQ:	1 Unidade
preço:	Contact us
Detalhes da embalagem:	Embalagem em caixa de madeira
Condições de Pagamento:	L/C,D/A,D/P,T/T,Western Union

Informações detalhadas

Descrição do produto

Informações detalhadas

Lugar de origem:

China

Certificação:

CE, ISO, ASME, ETC

Documento:

jufeng brochure-2025.pdf

Nome do produto:

Compressor de ar de parafuso de pressão média

Modelo:

JH-110ADV

Poder:

Elétrico

Tipo da extremidade do ar:

Parafuso

pressureRange:

Pressão média

Pressão de trabalho:

3,0/3,5/4,0MPa

Tensão:

380 V

Método de resfriamento:

Refrigerar de ar/refrigerar de água

Habilidade da fonte:

3000 unidades por mês

Destacar:

two-stage medium-pressure air compressor

screw air compressor with warranty

industrial medium-pressure screw compressor

Descrição do produto

Jufeng Two-stage Medium-pressure Screw Air Compressor

Product photo

Jufeng Two-stage Medium-pressure Screw Air Compressor 0

Product Introduction

Medium-pressure screw compressor vs reciprocating piston compressor

	Medium-pressure screw compressor	Reciprocating piston compressor
Principle	By continuously compressing the gas through a pair of intermeshing screw rotors, without reciprocating motion	The gas is compressed intermittently through the reciprocating motion of the piston within the cylinder.
Structure/Operation	The structure is simple, with few moving parts. It operates smoothly, has no inertial force and generates little vibration.	The structure is complex, with many moving parts (such as pistons, connecting rods, and valves), resulting in significant vibration and noise.
Efficiency/Energy Consumption	The isothermal efficiency is relatively high, especially during partial load conditions, where it can be adjusted continuously by the slide valve to maintain a high efficiency. The full-load efficiency is close to that of excellent piston machines.	The insulation efficiency is high. Under rated conditions and full load, the efficiency may be slightly better than that of the screw machine. However, the efficiency drops significantly during partial load operation.
Displacement/Pressure	The compression process is continuous, the airflow is without pulsations, and the oil content is well controlled (by the injection screw).	There are significant pulses in the exhaust, requiring a post-treatment buffer tank. The lubricating oil may be carried into the gas by the piston rings, resulting in a relatively high oil content.
Maintenance/Lifespan	The maintenance is simple. The main tasks are to replace the "three filters and one oil" and the oil separator regularly. The maintenance workload is small.	The maintenance is complex and frequent, and it is necessary to replace the wear-prone parts such as piston rings, valves, and bearing shells regularly. Professional technicians are required and the downtime is long.
Initial investment	The cost of a one-time purchase is relatively high, especially for the main rotor.	The one-time purchase cost is relatively low and the structure is relatively simple.
Footprint	Compact structure with a small footprint.	Large and bulky, requires more space and higher foundation specifications.